+49 (451) 703 64 214

LABOM – seite 5

Verkauf jedes Produkts aus dem LABOM Katalog zu guten Preisen

Unser Unternehmen FAMAGA ist kein Hersteller, autorisierter Distributor oder offizieller Vertreter der Marke LABOM in Deutschland. Die auf dieser Website angezeigten privaten Warenzeichen und Artikelnummern sind Eigentum ihrer jeweiligen Inhaber.

LABOM – seite 5

Verkauf jedes Produkts aus dem LABOM Katalog zu guten Preisen

Artikel

Beschreibung

Preis

CI4110-A1056-F2-H21-M21.1-Y12-T30-K1085-X3-W4022-W2002-W26 74 DL3430-HY-A4007-L23-T14-W4035-W1020

PRESSURE TRANSMITTER PASCAL Ci4 for diaphragm seal operation, hygienic process connection bottom see data sheet D4-016-2 CI4110 nominal range: 0...4 bar, Turndown max. 100:1, overload limit 10 bar; sensor type piezoresistiv A1056 accuracy: <= 0.10% from adjusted measuring span (Lin./Hys./Rep., up to Turndown <=5:1 no changes) F2 parameterizing: see below -1...+3 bar H21 output signal: 4...20 mA with HART high-resolution graphic display with backlight intuitive 4-button operation, quick access to device data available languages (English, German), default setting English M21.1 Y1 material case: stainless steel mat. no. 1.4301/1.4305 (304/303) 2 material front cover: stainless steel, window non-splittering glass degree of protection: IP 65 / IP 67 T30 electrical connection: circular connector M12 x 1 (4 pin) K1085 design: standard X3 temperature compensation: active temperature compensation ATC marking: stainless steel Tag-plate, fixed with stainless steel wire, marking see below W4022 W2002 CALIBRATION PROTOCOL: with 5 measuring points W2674 EAC-TR certification exemption statement process connection: DL DIAPHRAGM SEAL for food / pharmaceutical / biotechnology design with clamp connection see data sheet D5-026 3 process connection: per DIN 32676 model C (Tri-Clamp) for pipes per ASME BPE, DN 2 1/2" / PN 16 430 hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm connection of meas. instrument directly welded 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered L23 T14 temperature, media: -10..+150 °C W4035 ADDITIONAL DESIGN: wetted parts electropolished W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts

Auf Anfrage

Preis anfragen

MZ1100-B64-W2002 CV3110-A1059-F80-H2100-M1-N10-T30-K1085-W4022-W2674 BH5200 ECO-A99-W5124-W2674 DL8090-HY-D2546-E7-G7-H2-A400-L23-T99-W4035-W1020

MZ1100 COMBIBAR PRESSURE MEASURING SYSTEM B64 drawing no.: PD-WV-00178 BOURDON TUBE PRESSURE GAUGE: W2002 CALIBRATION PROTOCOL: with 5 measuring points PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 CV3110 A1 pressure sensor: piezoresistive for gauge pressure 059 nominal range: 0...16 bar, overload limit 60 bar measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) F80 measuring range: setting see below lower range value: - 1,000 upper range value: + 4,000 unit: bar H21 output signal: 4...20 mA with HART function module 0 setting damping: 0.0 sec. (standard) 0 setting alarm state: < 3.6 mA (standard) M1 display module: without screw cap closed, without window N10 switching module: without case: hygienic housing design with screw cap material: stainless steel degree of protection: IP 66 T30 electrical connection: circular connector M12x1 (4 pin) K1085 design standard process temperature 0...+125 °C, short term up to +140 °C, 1 h ADDITIONAL DESIGN: stainless steel Tag-plate with stainless steel wire marking see below W4022 W2674 EAC-TR certification exemption statement PRESSURE GAUGE DN 100 ECOnomic for food/pharmaceutical/biotechnology acc. to data sheet D2-028-5 BH52 00 case design: IP 65, process connection bottom A99 nominal range: see below -1 ... 4 bar overload protected: 1.3 times pointer: with micro adjusting device for zero-point correction CUSTOMER'S SPECIFICATION: scale: Zeta logo type plate: Labom documentation: Labom W5124 W2674 EAC-TR certification exemption statement DIAPHRAGM SEAL for food/pharmaceutical/biotechnology see data sheet D5-024-3 DL8 090 design: process connection per INGOLD hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm HY D25 process connection: DN 25, hexagon union nut A/F 46, G 1 1/4" 46 insertion length: h = 46 mm E7 basic body material: stainless steel mat.-no. 1.4435 (316L), wetted part G7 diaphragm material: stainless steel mat.-no. 1.4435 (316L) H2 gasket: per EPDM -FDA A400 connection of meas. instrument directly welded system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered L23 DMB_729 T99 temperature, media: see below +10...+150°C W4035 ADDITIONAL DESIGN: wetted parts electropolished W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts

Auf Anfrage

Preis anfragen

BE4200-A2999-L4600-W4022-W5124-W1020-W2002-W2674

Bourdon tube pressure gauge with switch contact, chemical design acc. to data sheet D3-025 BE4 2 case: NS 100 per EN 837-1 S1 0 case design: IP 65, process connection bottom 0 explosion protection: without A2 pressure connection: G 1/2 B 999 nominal range: see below -1 ... 6 bar L4 switch contact: magnetic snap contact 600 switch function: 1 x min. change over contact electrical connection: connection plug with cable gland M20 x 1.5 and removable test cover, mat. Macrolon ADDITIONAL DESIGN: stainless steel Tag-plate with stainless steel wire marking see below W4022 CUSTOMER'S SPECIFICATION: scale: Zeta logo type plate: Labom documentation: Labom W5124 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W1020 W2002 CALIBRATION PROTOCOL: with 5 measuring points W2674 EAC-TR certification exemption statement

Auf Anfrage

Preis anfragen

BE4220-A2092-L4120-W4020

Pressure gauge BE4 - Bourdon tube pressure gauge with switch contact, chemical design acc. to data sheet D3-025 case: NS 100 per EN 837-1 S1 2 - case design: IP 65 with case filling, process 2 - connection bottom 0 - explosion protection: without A2 - pressure connection: G 1/2 B 092 - nominal range: -1...15 bar L4 - switch contact: magnetic snap contact 120 - switch function: 1 x max. closed- + 1 x max. open contact electrical connection: connection plug with cable gland M20 x 1.5 and removable test cover, mat. Macrolon W4020 - ADDITIONAL DESIGN: marking (adhesive label), see below

Auf Anfrage

Preis anfragen

CA1110-A3058-H1-T120.1-K193

PRESSURE TRANSMITTER COMPACT ECOnomic for diaphragm seal operation, hygienic see data sheet D4-019-6 pressure sensor thin film for gauge pressure measuring range: 0...10 bar, overload limit 20 bar accuracy: Lin./Hyst./Repr. <= 0.5 % of the adjusted measuring range (standard) output signal: 4...20 mA, 2-wire technology electrical connection: circular connector M12, pin connection: 1=(+) 2= (-) degree of protection: IP 65 (standard) process connection: screw-in thread G 1/2 A, incl. gasket material NBR flush mounted diaphragm with backup ring material stainless steel ASTM 316L system filling: Synthetic oil, free of silicon FD1, FDA listed

Auf Anfrage

Preis anfragen

CC6010-A1011-H1-T110 DL3300-HY-A4007-L22

CC6 PRESSURE TRANSMITTER COMPACT for diaphragm seal operation 01 design: standard see data sheet D4-020-5 0 explosion protection: without A1 pressure sensor piezoresistive for gauge pressure 011 measuring range 0...400 mbar, overload limit 3 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. with limited accuracy Tk < 0.4% / 10K H1 output signal: 4...20 mA, 2-wire technology T110 electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, Form A), IP 65 DL DIAPHRAGM SEAL for food / pharmaceutical / biotechnology 3 design with clamp connection see data sheet D5-026 300 process connection: per ISO 2852 for pipes per ISO 2037, DN 51 / PN 16 HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm A400 connection of meas. instrument directly welded 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) L22 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered design temperature process -10...+140 °C

Auf Anfrage

Preis anfragen

1112040/01/003

CS2110-A1009-F2-H11-N10-T30-K1085-K195 CS2110 A1 pressure sensor: piezoresistive for gauge pressure measuring range 0...160 mbar, overload limit 1 bar measuring accuracy: linearity, hysteresis, repeatability 0.5 mbar of measuring range 009 F2 parameterization: see below Anzeige: 0 - 100 % (entspricht 0 - 160 mbar) H11 output signal: 4...20 mA, 2-wire technology N10 switching output: without T30 electrical connection: circular connector M12x1 (4 pin) K1085 design: standard process connection: screw-in thread G1 A / PN 50 material stainless steel ASTM 316L, with O-ring-gasket material NBR system filling: Synthetic oil, free of silicon FD1, FDA listed K195 process temperature: -20...+125 °C, short term up to +140 °C, 1 h

Auf Anfrage

Preis anfragen

CS2110-A1090-H11-N10-T30-K1085-K136

CS2110 PRESSURE TRANSMITTER/PRESSURE SWITCH PASCAL CS for diaphragm seal operation, hygienic, see data sheet D4-017-42 A1 pressure sensor: piezoresistive for gauge pressure measuring range -1...5 bar, overload limit 20 bar measuring accuracy: linearity, hysteresis, repeatability <= 0.2 % of span 090 H11 output signal: 4...20 mA, 2-wire technology N10 switching output: without T30 electrical connection: circular connector M12x1 (4 pin) K1085 design: standard process connection: Tri-Clamp, DN 1" / PN 25 material stainless steel mat.-no. 1.4404/1.4435 (316L) system filling: Synthetic oil, free of silicon FD1, FDA listedH1 K136 process temperature: -20...+125 °C, short term up to +140 °C, 1 h

Auf Anfrage

Preis anfragen

CA2110-A1054-H11-T30-K1085-K195

CA2110 PRESSURE TRANSMITTER UNIVERSAL CA for diaphragm seal operation, hygienic A1 pressure sensor: piezoresistive for gauge pressure measuring range 0...1.6 bar, overload limit 10 bar measuring accuracy: linearity, hysteresis, repeatability <= 0.2 % of span 054 H11 output signal: 4...20 mA, 2-wire technology T30 electrical connection: circular connector M12x1 (4 pin) K1085 design: standard process connection: screw-in thread G1 A / PN 50 material stainless steel ASTM 316L, with O-ring-gasket material NBR system filling: Synthetic oil, free of silicon FD1, FDA listed K195 process temperature: -20...+125 °C, short term up to +140 °C, 1 h

Auf Anfrage

Preis anfragen

CI4330-A1053-F1-H21-M22.2-Y12-T200 (+/-) DD4100-B50197L-L23-T63

CI4330 DIFFERENTIAL PRESSURE- AND LEVEL TRANSMITTER PASCAL Ci4 DELTA P see data sheet D4-071-2 A1053 1 bar, Turndown max. 100:1 overload limit +side 20 bar overload limit -side 10 bar static excess pressure max. 75 bar, both sides accuracy: <= 0.10% from adjusted measuring span (Lin./Hys./Rep., up to Turndown <=5:1 no changes) F1 parameterizing: standard, see data sheet H21 output signal: 4...20 mA with HART M22.2 high-resolution graphic display with backlight intuitive 4-button operation, quick access to device data available languages (English, Chinese), default setting Chinese Y1 material case: stainless steel mat. no. 1.4301/1.4305 (304/303) 2 material front cover: stainless steel, window non-splittering glass degree of protection: IP 65 / IP 67 T20 electrical connection: cable gland M 16 x 1.5, polyamide black, for cable ø 4.5-10 mm 0 cable clamps: spring clip terminals up to 1.5 mm2 mounting diaphragm seal +/-side Diaphragm seal for food/pharmaceutical/biotechnology DRD-connection acc. to data sheet D5-024-4 100 nominal width/pressure: DN 50 / PN 40 B50 connection of meas. instrument with capillary and protective tube, directly welded 19 length of capillary 2 m 7L material wetted parts: stainless steel mat.-no. 1.4435 (316L), membrane LTC-TECHNOLOGY L23 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered T63 operating temperature: -10...+140 °C

Auf Anfrage

Preis anfragen

PH5100

PH5100-A1-F11 UNIVERSAL panel indicator acc. to data sheet M6-051 LED display, 5-digits, red, 16 mm high 96 x 48 mm housing format, depth 32 mm front protection IP 65 2 alarm outputs as relay electrical supply: 24 V DC +/- 15%, 50 mA processible sensor signal: current 0(4)...20 mA voltage 0...5/10 V 0...50 mV temperature Pt100, thermocouples supply: 100 to 240 VAC +/-10 %, 50/60Hz, 6 VA configuration: without configuration

Auf Anfrage

Preis anfragen

CE6120-A1060-K1020-T120-H1

COMPACT PRESSURE TRANSMITTER with threaded connection design: flush mounted diaphragm, with temperature decoupler Ex-protection: without pressure sensor: piezoresistive for gauge pressure measuring range 0...25 bar, overload limit 60 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. process connection: threaded connection nominal width: M22 x 1.5 with O-ring and sealing washer gasket material: NBR electrical connection: circular connector M12, IP 65, union nut of polyamide output signal: 4...20 mA, 2-wire technology

Auf Anfrage

Preis anfragen

CB2020-A1999-H1-T1-W4029

Druckmessgerät

Auf Anfrage

Preis anfragen

CV3110-B1059-F10-H1100-M1-N50-T31-K1085 DD4100-HY-A4007-L22

CV3110 PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 B1 pressure sensor: piezoresistive for absolute pressure 059 nominal range: 0...16 bar abs., overload limit 60 bar measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) F10 measuring range: 0...16.00 bar abs. H11 output signal: 4...20 mA, rising characteristic (standard) 0 setting damping: 0.0 sec. (standard) 0 setting alarm state: < 3.6 mA (standard) M1 display module: without screw cap closed, without window N5 switching module: with 2 floating channels, pluggable, electrically isolated at all sides, switching capacity 30 V DC / 0.5 A 0 switching module setting: standard, see below 1. switch contact: switch point: 50 % breaker, hysteresis: 0.1 %, falling, standard 2. switch contact: switch point: 50 % breaker, hysteresis: 0.1 %, falling, standard case: hygienic housing design with screw cap material: stainless steel degree of protection: IP 66 T31 electrical connection: circular connector M 12x1 (8 pin) K1085 design standard DD4 DIAPHRAGM SEAL for food/pharmaceutical/biotechnology DRD-connection acc. to data sheet D5-024-4 100 nominal width/pressure: DN 50 / PN 40 HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 µm - diaphragm Ra <= 0.38 µm - weld seam Ra <= 0.76 µm A400 connection of meas. instrument directly welded 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) L22 system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered operating temperature range -10...+140 °C

Auf Anfrage

Preis anfragen

GA2700-HY-A1423-C1050-G11-N2-T150-Z52-W2002 PA2430-F11-H1

GA2700-HY-A1423-C1050-G11-N2-T150-Z52-W2002 PA2430-F11-H1 GA2700-HY RESISTANCE THERMOMETER MiniTherm for food/pharmaceuticals/biotechnology acc. to data sheet T4-015 measuring resistor: Pt100, tolerances per class A per DIN EN 60751 A14 process connection: clamp connection 23 nominal width: per ISO 2852, DN 25 / 38 (1" / 1 1/2"), ø 50.5 mm C1 temperature detecting element: ø 6 mm 050 insertion length U1: 50 mm G11 material wetted parts: stainless steel mat.-no. 1.4404 (316L) N2 measuring resistor: 1 x Pt100, 3-wire technology, standard T150 electrical connection: circular connector M12 x 1 (4 pins) Z52 incl. transmitter into st. steel plug housing with locking plug M12 (type PA2430) W2002 CALIBRATION PROTOCOL: with 5 measuring points PA243 TRANSMITTER for temperature (Pt 100), programmable see data-sheet T4-082-1 with circular connector M12x1 (4-pins) 0 design: standard F11 configuration: standard measuring range: 0...+100 °C, standard error current if there is a sensor break 22.8 mA sensor offset: 0 °C, standard damping: 0 s, standard H1 output signal: 4...20 mA, standard

Auf Anfrage

Preis anfragen

GA2510

GA2510-A101-B43-C121300-D2-M22-N2-T11-W2674 GA251 RESISTANCE THERMOMETER Pt 100 with thermowell see data sheet T4-025-2 0 explosion protection: without A10 process connection: G 1/2 B 1 material process connection: stainless steel mat.-no. 1.4571 (316Ti) B43 thermowell length total L: 395 mm C12 thermowell diameter: F1 = 9 mm 1 material thermowell: stainless steel mat.-no. 1.4571 (316Ti) 300 insertion length U1: 300 mm length of measuring insert l5: 405 mm D2 measuring insert: ø 6 mm, rigid M2 tolerance: class A per DIN EN 60751 2 application range: -50...+400°C N2 sensor type: 1 x Pt100, 3-wire technology T11 connection head: model B, cap with 2 slotted screws, IP 54 material: aluminium electrical connection: M20x1.5 cable gland for cable ø 9-14 mm, material nickel-plated brass W2674 EAC-TR certification exemption statement

Auf Anfrage

Preis anfragen

CA2110-A1091-H11-T30-K2285-K147-HY-W1020-W2002

CA2110 PRESSURE TRANSMITTER UNIVERSAL CA for diaphragm seal operation, hygienic A1 pressure sensor: piezoresistive for gauge pressure 091 measuring range -1...9 bar, overload limit 100 bar measuring accuracy: linearity, hysteresis, repeatability <= 0.2 % of span H11 output signal: 4...20 mA, 2-wire technology T30 electrical connection: circular connector M12x1 (4 pin) K2285 design: with temperature decoupler (up to 175 °C) K147 process connection: clamp connection per DIN 32676, DN 40 / PN 25 material stainless steel mat.-no. 1.4404/1.4435 (316L) system filling: Synthetic oil, free of silicon FD1, FDA listed HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm process temperature: -20...+175 °C W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W2002 CALIBRATION PROTOCOL: with 5 measuring points NOTE: ************** Please refer to the current order code. The requested code is outdated and no longer valid. Custom-Tariff-No.: 90262020

Auf Anfrage

Preis anfragen

W1301

0…+10Bar 4-20mA 2-Draht,M12 Ra0,8mM G1/2"B

Auf Anfrage

Preis anfragen

CA1100-A3058-H1-T120-K10

CA1100 PRESSURE TRANSMITTER COMPACT ECOnomic with threaded connection A3 pressure sensor thin film for gauge pressure 058 measuring range: 0...10 bar, overload limit 20 bar accuracy: Lin./Hyst./Repr. <= 0.5 % of the adjusted measuring range (standard) H1 output signal: 4...20 mA, 2-wire technology T120 electrical connection: circular connector M12 degree of protection: IP 65 / IP 67 K10 process connection: G 1/2 B per DIN EN 837-1 Custom-Tariff-No.: 90262020

Auf Anfrage

Preis anfragen

CA1110-A3059-H1-T120-K144-HY-W1020-W1201-W1223

CA1110 PRESSURE TRANSMITTER COMPACT ECOnomic for diaphragm seal operation A3 pressure sensor thin film for gauge pressure 059 measuring range: 0...16 bar, overload limit 100 bar accuracy: Lin./Hyst./Repr. <= 0.5 % of the adjusted measuring range (standard) H1 output signal: 4...20 mA, 2-wire technology T120 electrical connection: circular connector M12 degree of protection: IP 65 / IP 67 K144 process connection: clamp connection DN 25 / PN 25, ø 50.5 mm per DIN 32676 model A for pipes per DIN 11850 material stainless steel ASTM 316L system filling: Synthetic oil, free of silicon FD1, FDA listed HY hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm process temperature -10...+140 °C W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W1201 INSPECTION CERTIFICATE 3.1 calibration certificate with 5 measuring points W1223 INSPECTION CERTIFICATE DIN EN 10204 3.1 Custom-Tariff-No.: 90262020

Auf Anfrage

Preis anfragen

CV3110-B1059-F10-H1100-M1-N10-T31-K1085

CV3110-B1059-F10-H1100-M1-N10-T31-K1085 PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 CV3110 pressure sensor: piezoresistive for absolute pressureB1 nominal range: 0...16 bar abs., overload limit 60 bar059 measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) measuring range: 0...16.00 bar abs.F10 output signal: 4...20 mA, rising characteristic (standard)H11 setting damping: 0.0 sec. (standard)0 setting alarm state: < 3.6 mA (standard)0 display module: withoutM1 screw cap closed, without window switching module: withoutN10 case: hygienic housing design with screw cap material: stainless steel degree of protection: IP 66 electrical connection: circular connector M 12x1 (8 pin)T31 design standardK1085 DIAPHRAGM SEAL for food/pharmaceutical/biotechnology DRD-connection acc. to data sheet D5-024-4 DD4 nominal width/pressure: DN 50 / PN 40100 connection of meas. instrument directly welded A400 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered operating temperature range -10...+140 °C

1502.61 €

CA1110-A3058-H1-T120-K136-HY06-W1020-W1201-W1223

CA1110 PRESSURE TRANSMITTER COMPACT ECOnomic for diaphragm seal operation A3 pressure sensor thin film for gauge pressure 058 measuring range: 0...10 bar, overload limit 20 bar accuracy: Lin./Hyst./Repr. <= 0.5 % of the adjusted measuring range (standard) H1 output signal: 4...20 mA, 2-wire technology T120 electrical connection: circular connector M12 degree of protection: IP 65 / IP 67 K136 process connection: clamp connection DN 1" / PN 25, ø 50.5 mm per DIN 32676 model C (Tri-Clamp) for pipes per ASME BPE material stainless steel ASTM 316L system filling: Synthetic oil, free of silicon FD1, FDA listed HY06 hygienic design per EHEDG Doc.8 and ASME BPE SF1: surface roughness (wetted parts) - turned parts Ra <= 0.51 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm process temperature -10...+140 °C W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts W1201 INSPECTION CERTIFICATE 3.1 calibration certificate with 5 measuring points W1223 INSPECTION CERTIFICATE DIN EN 10204 3.1 roughness height rating Ra Custom-Tariff-No.: 90262020

Auf Anfrage

Preis anfragen

GA2610-A4254-M23-N32-T150-Z52-W4020-W2004 PA2430-F12-H1

# For piping 1 inch # GA261 RESISTANCE THERMOMETER Clamp-on technology for temperature measurement on pipes see data sheet T4-028 0 explosion protection: without A4 clamping element: for collar installation 254 for pipe external diameter: 25.4 mm M23 material insulating sleeve: PVDF (-40...+150 °C) N32 measuring resistor: 1 x Pt100, per DIN EN 60751 class A, 4-wire technology T150 connection head: circular connector M12 x 1 (4 pins) Z52 transmitter mounting: integrated in the circular connector M12, Type PA2430 W4020 ADDITIONAL DESIGN: marking (adhesive label), see below W2004 CALIBRATION PROTOCOL: with 3 measuring points PA243 TRANSMITTER for temperature (Pt 100), programmable see data-sheet T4-082-1 with circular connector M12x1 (4-pins) 0 design: standard F12 configuration: see below measuring range: 0...+150 °C error current if there is a sensor break 22.8 mA damping: 0 s, standard H1 output signal: 4...20 mA, standard Custom-Tariff-No.: 90251900

Auf Anfrage

Preis anfragen

CB6010-A1060-H1-K1010-T110

COMPACT PRESSURE TRANSMITTER with threaded connection see data sheet D4-020-1 design: internal diaphragm explosion protection: without pressure sensor: piezoresistive for gauge pressure measuring range 0...25 bar, overload limit 60 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. output signal: 4...20 mA, 2-wire technology process connection: G1/2 B nach DIN 837-1 material wetted parts - sensor diaphragm, stainless steel mat. no. 1.4404/1.4435 (316L) socket, stainless steel mat. no. 1.4404/1.4435 (316L) electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, model A) IP 65, for cable ø 4...10 mm

Auf Anfrage

Preis anfragen

GA2610-A4127-M23-N32-T150-Z52-W4020-W2004 PA2430-F12-H1

# For piping 0,5 inch # GA261 RESISTANCE THERMOMETER Clamp-on technology for temperature measurement on pipes see data sheet T4-028 0 explosion protection: without A4 clamping element: for collar installation 127 for pipe external diameter: 12.7 mm M23 material insulating sleeve: PVDF (-40...+150 °C) N32 measuring resistor: 1 x Pt100, per DIN EN 60751 class A, 4-wire technology T150 connection head: circular connector M12 x 1 (4 pins) Z52 transmitter mounting: integrated in the circular connector M12, Type PA2430 W4020 ADDITIONAL DESIGN: marking (adhesive label), see below W2004 CALIBRATION PROTOCOL: with 3 measuring points PA243 TRANSMITTER for temperature (Pt 100), programmable see data-sheet T4-082-1 with circular connector M12x1 (4-pins) 0 design: standard F12 configuration: see below measuring range: 0...+150 °C error current if there is a sensor break 22.8 mA damping: 0 s, standard # device acc. old fab.-no.: 1604324/03/004 # Custom-Tariff-No.: 90251900

Auf Anfrage

Preis anfragen

PA2200-F12-H1

PA2200-F12-H1 PA2200-F12-H1 TEMPERATURE TRANSMITTER head mounted, SIEMENS Sitrans TH200, 2-wire, universal programmable digital transmitter with electrically isolated input / output wire-break and short-circuit monitoring for sensor diagnostic LED for checking sensor and internal device operation test jacks for monitoring the output signal without breaking the current loop explosion protection: without configuration: see below 0...250 °C H1 signal of sensor breakage: 22.8 mA sensor offset: 0 °C damping: 0 s output signal: 4...20 mA; 2-wire circuitry

Auf Anfrage

Preis anfragen

BH4220-A90

BH4220-A90 DL5110-S4101-A4007-L22 BOURDON TUBE PRESSURE GAUGE with diaphragm seal connection, chemical design acc. to data sheet D2-029

Auf Anfrage

Preis anfragen

GA2510-A701-B99-C121128-D2-M22-N3-T11

GA251 RESISTANCE THERMOMETER Pt 100 with thermowell see data sheet T4-025-2 GA251 explosion protection: without0 process connection: G1/2 B, A/F 22A70 material process connection: stainless steel mat.-no. 1.4571 (316Ti)1 thermowell length total L (mm): 282,00B99 thermowell diameter: F1 = 9 mmC12 material thermowell: stainless steel mat.-no. 1.4571 (316Ti)1 insertion length U1: 128 mm128 measuring insert length l5 (in mm): 292,000 measuring insert: ø 6 mmD2 tolerance: class A per DIN EN 60751M2 application range: -50...+400°C2 sensor type: 1 x Pt100, 4-wire technologyN3 connection head: model B, cap with 2 slotted screws, IP 54 material: aluminium T11 electrical connection: M20x1.5 cable gland for cable ø 9-14 mm, material nickel-plated brass

385.07 €

CA1100-A3088-H1-T120-K10

CA1100 PRESSURE TRANSMITTER COMPACT ECOnomic with threaded connection A3 pressure sensor thin film for gauge pressure 088 measuring range: -1...1.5 bar, overload limit 6 bar accuracy: Lin./Hyst./Repr. <= 0.5 % of the adjusted measuring range (standard) H1 output signal: 4...20 mA, 2-wire technology T120 electrical connection: circular connector M12 degree of protection: IP 65 / IP 67 K10 process connection: G 1/2 B per DIN EN 837-1 Custom-Tariff-No.: 90262020

Auf Anfrage

Preis anfragen

CB6010-A1089-H1-K1010-T110

CB6 design: internal diaphragm01 explosion protection: without0 pressure sensor: piezoresistive for gauge pressureA1 measuring range -1...3 bar, overload limit 20 bar measuring accuracy: linearity error incl. hysteresis < + 0.2 % f.s. accuracy of adjustment < +/- 0.2 % f.s. 089 output signal: 4...20 mA, 2-wire technologyH1 process connection: G1/2 B nach DIN 837-1K1010 material wetted parts - sensor diaphragm, stainless steel mat. no. 1.4404/1.4435 (316L) - socket, stainless steel mat. no. 1.4404/1.4435 (316L) electrical connection: right angle plug acc. to DIN EN 175301-803-A (DIN 43650, model A) IP 65, for cable ø 4...10 mm

395.41 €

1 2 3 4 5 6 7

Die Website enthält nur einen Teil der Katalogartikel der Herstellermarke LABOM.

Wenn Sie den gewünschten Artikel nicht gefunden haben, senden Sie eine Anfrage an die E-Mail [email protected] und wir senden Ihnen sicherlich ein unverbindliches Angebot.

Verkauf jedes Produkts aus dem LABOM Katalog zu guten Preisen

LABOM – seite 5

Verkauf jedes Produkts aus dem LABOM Katalog zu guten Preisen

Hier können Sie Produkte anderer Marken kaufen

Hinterlassen Sie Ihre Anfrage